Item no. 338180023

The wall tie bracket - double, allows a to create a wall tie using a standard tube. The tube connects to the two standards on the bracket. The hole on the bracket allows a bolt to be installed in order to secure the scaffold to the supporting structure.

Item no. 307070100

The Castor Wheel is designed to provide mobility to a medium to large size scaffold tower allowing the tower to roll across a flat surface.

Item no. 352512000

The Eye-bolt GS is used to secure the Wall tie bracket to the supporting structure.

Item no. 352610000

Item no. 352523000

The Eye-bolt GS is used to secure the Wall tie bracket to the supporting structure.

Item no. 335020000

The outer guardrail is used to shield the outer side of the staircase tower. Outer guardrails are available for stair lengths of 2.57m, 3.07m. The outer guardrail has a Swivel Wedge Terminal that allows to fix it to the rosette.

Item no. 455

The Aluminium lattice girder beam is a horizontal member of Ringlock scaffolding. It is used for reinforce and bridging over large spans of 3.05m to 8.52m with a lighter component than the Lattice Girders. The Alum lattice girders have 0.5m in depth.

Item no. 456

The Aluminum ladder is designed to attach to Ringlock scaffolding using the Ladder Hook Clamp/Clip. The Ladder feet and rungs are offset to allow for safe footing during access and egress. It is available in 4 different sizes: 2.4m, 3.6m, 4.8m and 6.0 m.

Item no. 457

The Gap filler plank is designed to span small openings in the Ringlock platform or between bays. They can also be used to overalp on circular scaffolds and perform the angular connection. They are fized with a plastic plug that is provided with them. They are available in two widths: 0.32m and 0.19m and un 3 different lengths: 1.00m, 1.50m and 2.00m.

Item no. 468

Truss ledgers have the same function as the normal ledgers: They are used as horizontals to connect standards, to transfer loads from platforms into standards and for making side protection of the scaffold. But due to reinforced design, they are able to transfer higher loads than normal ledgers. Double ledgers are available in lengths 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Item no. 527

The bracket is used to create an extended platform outside the scaffold and to add a "cantilever" to the construction. Brackets are available in lengths 0.39m, 0.73m and 1.09m.

Item no. 543

Infill planks with 19cm are designed to fill any unwanted gaps between planks or bays providing a continuous working platform. They are available in the sizes of the most common bays: 0.65m, 0,88m, 1.065m, 1.57m, 2.13m, 2.43m, 3.05m.

Item no. 556

Steel plans are used to create a working platform in a scaffold. They are placed directly onto the ledgers and secured with the integrated lift-out guard. Steel planks are available with two widths 0.19m and 0.32m and in lengths 0.73m, 1.09m, 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Item no. 557

Steel planksare used to create a working platform in a scaffold. They are placed directly onto the ledgers and secured with the integrated lift-out guard. Steel planks are available with two widths 0.19m and 0.32m and in lengths 0.73m, 1.09m, 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Item no. 559

Steel toe boards are mounted on working platforms to prevent material from falling down. These Toeboards are galvanized and not yellow.

Item no. 561

Bay braces are essential to increase the vertical stiffness of the scaffold! For stabilizing the outer plane of the scaffold, parallel and perpendicular to the facade, vertical braces are used. Vertical braces are placed in at least every 5th bay on every lift and in every end bay perpendicular to the facade. Diagonals are available for 1.00m, 1.50m and 2.0m heights, and bay lengths of 0.73m, 1.09m, 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Item no. 572

Bay braces are essential to increase the vertical stiffness of the scaffold! For stabilizing the outer plane of the scaffold, parallel and perpendicular to the facade, vertical braces are used. Vertical braces are placed in at least every 5th bay on every lift and in every end bay perpendicular to the facade. Diagonals are available for 1.00m, 1.50m and 2.0m heights, and bay lengths of 0.73m, 1.09m, 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Item no. 573

Bay braces are essential to increase the vertical stiffness of the scaffold! For stabilizing the outer plane of the scaffold, parallel and perpendicular to the facade, vertical braces are used. Vertical braces are placed in at least every 5th bay on every lift and in every end bay perpendicular to the facade. Diagonals are available for 1.00m, 1.50m and 2.0m heights, and bay lengths of 0.73m, 1.09m, 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Item no. 574

The wall tie tube is a scaffold tube with pin, designed to keep the standards in the vertical position without buckling.

Item no. 689