DK sealing cap made of plastic

Art.-No. 214

Weld-on socket for force-transmitting connection between tie rods.

Art.-No. 204

Storage and transport device for Dokadek panels.

Art.-No. 223

Framed panel with Xlife sheet and form-tie points on the inside for crane-assisted forming of large areas. The panel is secured with a tie-rod system consisting of form ties that can be operated from one side.

Art.-No. 035

Doka floor props Eurex eco are adjustable telescopic steel props that conform to EN 1065.
They are designed for use as vertical props for temporary structures.

Art.-No. 026

Forming right-angled outside corners, stop-ends and column formwork.

Art.-No. 068

Framed panel with Xlife sheet for crane-assisted forming of large areas.

Art.-No. 036

For load transfer, keeps the Doka formwork beams in position and gives the formwork panel stability and rigidity.

Art.-No. 095

Art.-No. 301013000

Standards with presseded spigot are used as “verticals” to transmit loads to the ground. Rosettes are welded every 50cm which allow to create a connection between different elements. These standards are not to be used for suspended scaffolds! Standards are available in incremintle lengths from 0.50m to 4.00m.

Art.-No. 301012500

Standards with presseded spigot are used as “verticals” to transmit loads to the ground. Rosettes are welded every 50cm which allow to create a connection between different elements. These standards are not to be used for suspended scaffolds! Standards are available in incremintle lengths from 0.50m to 4.00m.

Art.-No. 301012000

Standards with presseded spigot are used as “verticals” to transmit loads to the ground. Rosettes are welded every 50cm which allow to create a connection between different elements. These standards are not to be used for suspended scaffolds! Standards are available in incremintle lengths from 0.50m to 4.00m.

Art.-No. 301011500

Standards with presseded spigot are used as “verticals” to transmit loads to the ground. Rosettes are welded every 50cm which allow to create a connection between different elements. These standards are not to be used for suspended scaffolds! Standards are available in incremintle lengths from 0.50m to 4.00m.

Art.-No. 301010500

Standards with presseded spigot are used as “verticals” to transmit loads to the ground. Rosettes are welded every 50cm which allow to create a connection between different elements. These standards are not to be used for suspended scaffolds! Standards are available in incremintle lengths from 0.50m to 4.00m.

Plywood sheet made of Nordic birch with 220 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with acrylic-resin varnish.

Art.-No. 022