Art.-No. 589164000

Can be pushed over the end face of the panel (no nails needed). With column formwork and for forming outside corners, it is used with the universal panel (integrated slot grid for universal fixing bolts).

Art.-No. 589167000

Bracket for making a working platform for drop-in engagement on the formwork.

Art.-No. 586643000

Grating for safety barriers on the structure.

Art.-No. 586642000

Grating for safety barriers on the structure.

Art.-No. 586646000

Storage and transport device for Protective barriers Z.

The outer guardrail is used to shield the outer side of the staircase tower. Outer guardrails are available for stair lengths of 2.57m, 3.07m. The outer guardrail has a Swivel Wedge Terminal that allows to fix it to the rosette.

Art.-No. 455

Vertical stacking of a Supporting construction frame "Universal" with Attachable frame F 1.50m for formwork heights from 6.00 m to 8.00 m.

Art.-No. 458

Installing form-tie components at an angle of 45 °.

Art.-No. 459

Securing System ladder XS to column formwork.

Art.-No. 460

The Gap filler plank is designed to span small openings in the Ringlock platform or between bays. They can also be used to overalp on circular scaffolds and perform the angular connection. They are fized with a plastic plug that is provided with them. They are available in two widths: 0.32m and 0.19m and un 3 different lengths: 1.00m, 1.50m and 2.00m.

Art.-No. 468

The sensor is for taking measurements on horizontal concrete components (bottom slab, floor slab, etc.).

Art.-No. 479

Measuring cable with three measuring points. The cable connects to the Concremote cable sensor and is cast into the concrete as a lost part.

Art.-No. 480

The cable sensor can be deployed for various applications depending on customer requirements. Concremote wall sensing unit or Concremote cable can be connected.

Art.-No. 481

The calibration box cube is for calibrating the type of concrete used and consists of 3 cube moulds 15x15x15 mm.

Art.-No. 482

Prevents adhesion between concrete and cone with insulation up to 11 cm thick.

Art.-No. 486

Release agent specially for smooth formwork surfaces.

Art.-No. 496

Framed element made of aluminium with Xlife sheet for craneless forming of right-angle outside corners, stop-ends and column formwork.

Art.-No. 512

Corner element made of aluminium with Xlife sheet for craneless forming of right-angle inside corners.

Art.-No. 524

Truss ledgers have the same function as the normal ledgers: They are used as horizontals to connect standards, to transfer loads from platforms into standards and for making side protection of the scaffold. But due to reinforced design, they are able to transfer higher loads than normal ledgers. Double ledgers are available in lengths 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Art.-No. 527

Plywood sheet made of Chinese eucalyptus with 240 g/m² phenolic-resin film coating on both sides. The phenolic resin bond of the sheet passes a 72-hour boiling test. The edges are sealed with acrylic-resin varnish.

Please note: online ordering of large formats is only possible for full lorries (no pannels in stock). More information in the description.

Art.-No. 533