High-grade plywood sheet made of Nordic birch with 120 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with an emulsion coating.

Anzahl Lagen: 7

Art.-No. 015

High-grade plywood sheet made of Nordic birch with 220 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with an emulsion coating.

Art.-No. 017

High-grade plywood sheet made of Nordic birch with polypropylene coating on both sides, on the concrete facing side with glass-fibre reinforcing. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with high-grade 2-component edge protection varnish.

Art.-No. 018

High-grade plywood sheet made of Nordic birch with fibre-reinforced synthetic-resin coating on the concrete-facing side and 120 g/m² phenolic-resin film coating on the back side. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with high-grade 1-component edge protection varnish.

Anzahl Lagen: 15

Art.-No. 019

Plywood sheet made of Nordic birch with 220 g/m² phenolic-resin film coating on both sides. The glue-bonding meets the requirements of EN 314-2 Service Class 3 or BS 6566 WBP. The edges are sealed with acrylic-resin varnish.

Anzahl Lagen: 15

Art.-No. 022

Art.-No. 147

The plywood sheet for concrete surfaces without special requirements

EUCAplex plus is a eucalyptus veneer plywood sheet with 240 g/m² film coating on both sides, for horizontal and vertical formwork applications.

Art.-No. 533

The Xlife panel Framax is a high-qualityplastic-wood composite panel with a resistant plastic coating for a significantly longer service life and a consistentlyuniform concrete finish.

Art.-No. 584

Art.-No. 185241500

Plywood sheet made of Chinese poplar veneer with composed deck Veneers. Both sides are coated with 120 g/m² brown phenolic-resin film. Bonding is exterior and will pass a 24 h boiling test.