Eye-bolt for anchoring scaffolds or stair towers to a building using wall tie tubes.

Art.-No. 794

Ledger to plan transoms can be placed between one deck and one ledger within a bay to support decks e.g. for making ladder openings or create openings. They are available in widths equivalent to 1, 2 and 3 Boards.

Art.-No. 810

Standards hanging without spigot are used as “verticals” to transmit loads to the ground. The fact that they don´t have spigots, allows them to be used for shoring applications. Standards are available in incremintle lengths. Rosettes are welded every 50cm which allow to create a connection between different elements. In order to join 2 standards a Spigot needs to used. These standards are to be used for suspended Scaffolds

Art.-No. 845

Art.-No. 310012004

Adjustable swing gate designed to secure an opening used for access & egress. It allows to cover openings from 0.88 m to 1.35 m.

Art.-No. 319050015

Aluminum hook-on ladder for hatch-decks without integrated ladder.

Art.-No. 397320000

The Base jack handle is installed ontop of a Base collar or Standard to prevent uplift in Rebar scaffold configurations.

Art.-No. 304032004

The Beam clamp forged rigid is designed to connect scaffold tube to the flanges of structural steel beams. They can also be used to support suspended scaffold from structural steel.

Art.-No. 304042004

The Beam clamp swivel is designed to connect scaffold tube to the flanges of structural steel beams. They can also be used to support suspended scaffold and create a variety of angles. They are used when the support members are not in the same direction as the scaffold.

Art.-No. 301121095

The Side bracket 1.09m is used at the edge of a scaffold to extend or widen the working platform.

Art.-No. 305082004

The Girder spigot adapter clamp is to be used with the Lattice girder and allows to put a standard and great guardrail or increase the scaffold with smaller bays above.

Art.-No. 306110004

The base jack retention prevents the kicker lift to fall off when hoisting the scaffold. It has a terminal wedge and a half coupler allowing to high versatility of the component.

Art.-No. 305012004

The RA adapter clamp is designed to easily join a scaffold tube directly to the Ringlock standard creating 90 degree angles.

Art.-No. 301300014

Rosette clamp horizontal allows a Ledger to be connected anywhere along the length of a bay. Allowing to create an intermediate transom.

Art.-No. 301300004

The Rosette clamp allows to add an additional rosette to any point along the vertical (tube Standard). It can accomodate up to six connection points.

Art.-No. 335050000

The rubber plug is used to secure lapping boards to main decking components.

Art.-No. 305032004

The Spigot adapter with clamp-bolt is used for creating handrails smaller than the bay length.

Art.-No. 316070010

The Aluminium Stair Guardrails are used to provide handrails on the inner side and outer side of the Aluminium Stair Platforms.

Art.-No. 305022004

The Swivel adapter clamp is designed to easily join a scaffold tube to the rosette of a Ringlock scaffold producing a variety of angles. Can be used to perform a Diagonal bay brace.

Art.-No. 304110004

The internal Tube joiner is designed to fit inside the end of the tubes and provide a rigid connection between two tubes.