Height-adjustable connections between load-bearing tower and superstructure.

Art.-No. 324

Height-adjustable, anti-tip connection between load-bearing tower and superstructure with one or two formwork secondary beams H20.

Art.-No. 325

Connecting Scaffold tubes 48.3mm at any angle to the vertical tubes of load-bearing tower frames.

Art.-No. 341

For securing plates and accessory parts, for example to multi-purpose walings.

Art.-No. 344

Bearing plate for connectors with form-tie angles up to 15 °.

Art.-No. 349

Aid for securing and back-staying floor formwork.

Art.-No. 351

Vertical stacking of a Supporting construction frame "Universal" with Attachable frame F 1.50m for formwork heights from 6.00 m to 8.00 m.

Art.-No. 458

Installing form-tie components at an angle of 45 °.

Art.-No. 459

Securing System ladder XS to column formwork.

Art.-No. 460

Prevents adhesion between concrete and cone with insulation up to 11 cm thick.

Art.-No. 486

Release agent specially for smooth formwork surfaces.

Art.-No. 496

Release agent specially for absorbent formwork surfaces.

Art.-No. 521

Plywood sheet made of Chinese eucalyptus with 240 g/m² phenolic-resin film coating on both sides. The phenolic resin bond of the sheet passes a 72-hour boiling test. The edges are sealed with acrylic-resin varnish.

Art.-No. 533

Art.-No. 185241500

Plywood formwork sheet made of high quality Chinese poplar veneer. Both sides are coated with 120 g/m² brown phenolic resin film. The bonding is in accordance with EN 314-3.

Use as a finish plywood or for applications with lower demands on the concrete surface and durability.

Art.-No. 754000259

High-quality three-layer pine wood panel with double-sided melamine resin coating.
 

Versatile use for standard applications. The panels leave a light wood texture on the surface of the concrete.

Forming acute-angle and obtuse-angle inside corners.

Art.-No. 048

Framed panel with Xlife sheet for craneless forming.

Art.-No. 056

Forming right-angled outside corners, stop-ends and column formwork.

Art.-No. 057

Forming right-angled inside corners.

Art.-No. 058

Forming right-angled outside corners.

Art.-No. 059