Art.-No. 586543000

Holding Dokadek panels at change of direction of the panels.

Art.-No. 586541000

Releasing Dokadek panels from the concrete.

Art.-No. 588466000

Support plate for Hexagon nut 15.0 in cramped spaces.

Art.-No. 586271000

EN 1065-compliant telescopic construction prop, made of steel.

Art.-No. 589217000

Fixes the spacing between the holding formwork and the opposing formwork. In addition, a parking holder for the Framax Xlife plus form tie is also integrated.

Art.-No. 589219000

For sealing the form-tie points in the concrete.

Art.-No. 589235000

Detaching the formwork from the hardened concrete.

Art.-No. 589282000

Accessory for making form-tie points in fair-faced concrete quality.

Art.-No. 589285000

Secures the stacked panels (without integral form-tie nuts) to prevent slippage.

Art.-No. 589283000

For sealing the open form-tie point made by the Framax Xlife plus fair-faced concr. cone 87mm in the concrete.

Art.-No. 589284000

Adapter for Framax Xlife plus ratchet 3/4" SW24 for removing the Framax Xlife plus fair-faced concr. cone 87mm from the concrete.

Art.-No. 589216500

Mounts on the holding formwork and, in combination with the Framax Xlife plus form tie, enables the form-tie point to be operated from one side.

Art.-No. 502709030

Securing the superstructure to Screw-jack U-heads with locking rod and wing nut.

Art.-No. 580081000

For securing Doka formwork beams to closure plates.

Art.-No. 580114000

For securing Doka beams anywhere on the waling. Also suitable for post-assembly securing.

Art.-No. 580135000

For securing Doka beams H20 anywhere on the multi-purpose waling.

Art.-No. 580204000

Securing connecting pins, for example.

Art.-No. 580267000

For making rigid corner plates at any angle. After the formwork has been plumbed, two Half splice plates are welded at the predefined angle.

Art.-No. 580310000

Bolt-up longitudinal connector for Doka beams. Used for vertical stacking.

Art.-No. 580340000

Repositioning framed formwork panels by crane.