DokaXlight adapter XP

Art.-No. 589148000

The DokaXlight adapter XP is used in combination with Protective gratings XP or guardrail boards for constructing safety railings on the opposing formwork with a tilt of 15°.

DokaXlight frontal triangular ledge 3.00m

Art.-No. 589164000

Can be pushed over the end face of the panel (no nails needed). With column formwork and for forming outside corners, it is used with the universal panel (integrated slot grid for universal fixing bolts).

Package size: 10 pcs.

Protective barrier Z 1.25x1.20m

Art.-No. 586643000

Grating for safety barriers on the structure.

Der Seitenschutz Xsafe Z bietet eine sichere und wirtschaftliche Lösung für den Gebäuderand. Durch das optimierte Design ist die Absturzsicherung leicht und trotzdem stabil. Sie enstpricht der EN 13374 Klasse A und unterstützt produktives und sicheres Arbeiten am Rohbau.

Protective barrier Z 2.50x1.20m

Art.-No. 586642000

Grating for safety barriers on the structure.

Der Seitenschutz Xsafe Z bietet eine sichere und wirtschaftliche Lösung für den Gebäuderand. Durch das optimierte Design ist die Absturzsicherung leicht und trotzdem stabil. Sie enstpricht der EN 13374 Klasse A und unterstützt produktives und sicheres Arbeiten am Rohbau.

Package size: 70 pcs.

Protective barrier Z pallet 1.20m

Art.-No. 586646000

Storage and transport device for Protective barriers Z.

Lashing strap

Aid for securing and back-staying floor formwork.

Art.-No. 351

Alum. stair outer guardrail

The outer guardrail is used to shield the outer side of the staircase tower. Outer guardrails are available for stair lengths of 2.57m, 3.07m. The outer guardrail has a Swivel Wedge Terminal that allows to fix it to the rosette.

Art.-No. 455

Attachable frame F

Vertical stacking of a Supporting construction frame "Universal" with Attachable frame F 1.50m for formwork heights from 6.00 m to 8.00 m.

Art.-No. 458

Anchor holder

Installing form-tie components at an angle of 45 °.

Art.-No. 459

Gap filler plank

The Gap filler plank is designed to span small openings in the Ringlock platform or between bays. They can also be used to overalp on circular scaffolds and perform the angular connection. They are fized with a plastic plug that is provided with them. They are available in two widths: 0.32m and 0.19m and un 3 different lengths: 1.00m, 1.50m and 2.00m.

Art.-No. 468

CUTplex basic F/F black 160

The affordable plywood sheet for cut-outs and offcuts

CUTplex basic is a veneered, film-coated poplar plywood sheet with a 160 g/m² phenolic resin film coating on both sides for subordinate applications and offcuts - e.g. for use as construction plywood for various on-site applications.

Art.-No. 485

Sealing sleeve

Prevents adhesion between concrete and cone with insulation up to 11 cm thick.

Art.-No. 486

Doka-OptiX

Das Trennmittel speziell für glatte Schalhaut

Art.-No. 496

DokaXlight universal panel

Framed element made of aluminium with Xlife sheet for craneless forming of right-angle outside corners, stop-ends and column formwork.

Art.-No. 512

Doka-Trenn

Das universelle Trennmittel für saugende Schalungsoberflächen

Art.-No. 521

DokaXlight inside corner

Corner element made of aluminium with Xlife sheet for craneless forming of right-angle inside corners.

Art.-No. 524

Truss ledger

Truss ledgers have the same function as the normal ledgers: They are used as horizontals to connect standards, to transfer loads from platforms into standards and for making side protection of the scaffold. But due to reinforced design, they are able to transfer higher loads than normal ledgers. Double ledgers are available in lengths 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Art.-No. 527

EUCAplex plus F/F d.b. 240 21mm

The plywood sheet for concrete surfaces without special requirements

EUCAplex plus is a eucalyptus veneer plywood sheet with 240 g/m² film coating on both sides, for horizontal and vertical formwork applications.

Art.-No. 533

Side bracket

The bracket is used to create an extended platform outside the scaffold and to add a "cantilever" to the construction. Brackets are available in lengths 0.39m, 0.73m and 1.09m.

Art.-No. 543

Ledger

Ledgers are used as horizontals to connect standards and to transfer loads from platforms into standards. Ledgers are also used for making side protection of the scaffold. Ledgers are available in lengths 0.15m, 0.39m, 0.73m, 1.04m, 1.09m, 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Art.-No. 549