The bracket is used to create an extended platform outside the scaffold and to add a "cantilever" to the construction. Brackets are available in lengths 0.39m, 0.73m and 1.09m.

Art.-No. 543

Ledgers are used as horizontals to connect standards and to transfer loads from platforms into standards. Ledgers are also used for making side protection of the scaffold. Ledgers are available in lengths 0.15m, 0.39m, 0.73m, 1.04m, 1.09m, 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Art.-No. 549

Infill planks with 19cm are designed to fill any unwanted gaps between planks or bays providing a continuous working platform. They are available in the sizes of the most common bays: 0.65m, 0,88m, 1.065m, 1.57m, 2.13m, 2.43m, 3.05m.

Art.-No. 556

Steel plans are used to create a working platform in a scaffold. They are placed directly onto the ledgers and secured with the integrated lift-out guard. Steel planks are available with two widths 0.19m and 0.32m and in lengths 0.73m, 1.09m, 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Art.-No. 557

Steel planksare used to create a working platform in a scaffold. They are placed directly onto the ledgers and secured with the integrated lift-out guard. Steel planks are available with two widths 0.19m and 0.32m and in lengths 0.73m, 1.09m, 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Art.-No. 559

Steel toe boards are mounted on working platforms to prevent material from falling down. These Toeboards are galvanized and not yellow.

Art.-No. 561

Bay braces are essential to increase the vertical stiffness of the scaffold! For stabilizing the outer plane of the scaffold, parallel and perpendicular to the facade, vertical braces are used. Vertical braces are placed in at least every 5th bay on every lift and in every end bay perpendicular to the facade. Diagonals are available for 1.00m, 1.50m and 2.0m heights, and bay lengths of 0.73m, 1.09m, 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Art.-No. 572

Bay braces are essential to increase the vertical stiffness of the scaffold! For stabilizing the outer plane of the scaffold, parallel and perpendicular to the facade, vertical braces are used. Vertical braces are placed in at least every 5th bay on every lift and in every end bay perpendicular to the facade. Diagonals are available for 1.00m, 1.50m and 2.0m heights, and bay lengths of 0.73m, 1.09m, 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Art.-No. 573

Bay braces are essential to increase the vertical stiffness of the scaffold! For stabilizing the outer plane of the scaffold, parallel and perpendicular to the facade, vertical braces are used. Vertical braces are placed in at least every 5th bay on every lift and in every end bay perpendicular to the facade. Diagonals are available for 1.00m, 1.50m and 2.0m heights, and bay lengths of 0.73m, 1.09m, 1.40m, 1.57m, 2.07m, 2.57m, 3.07m.

Art.-No. 574

The Xlife panel Framax is a high-qualityplastic-wood composite panel with a resistant plastic coating for a significantly longer service life and a consistentlyuniform concrete finish.

Art.-No. 581

Art.-No. 582

The Xlife panel Framax is a high-qualityplastic-wood composite panel with a resistant plastic coating for a significantly longer service life and a consistentlyuniform concrete finish.

Art.-No. 583

The Xlife panel Framax is a high-qualityplastic-wood composite panel with a resistant plastic coating for a significantly longer service life and a consistentlyuniform concrete finish.

Art.-No. 584

The Xlife panel Framax is a high-qualityplastic-wood composite panel with a resistant plastic coating for a significantly longer service life and a consistentlyuniform concrete finish.

Art.-No. 586

The Xlife panel Framax is a high-qualityplastic-wood composite panel with a resistant plastic coating for a significantly longer service life and a consistentlyuniform concrete finish.

Art.-No. 587

Closure between the panels.

Art.-No. 602

Corner element for forming right-angle outside corners.

Art.-No. 607

The high-quality formwork beam with a solid-web design

Protected, resistant, long-lasting – The Doka H20 pro N beam is a high-quality formwork beam in solid-web design with with a three-ply sheet web that can be used in wall and slab formwork systems. Its moulded-on polyurethane beam-end caps extend its usable lifespan and make it an everyday helper on any jobsite.

Please note that there may be delays in delivery due to increased demand and that delivery times may be longer.

Art.-No. 611

Forming acute-angle and obtuse-angle inside corners.

Art.-No. 619

The plywood sheet for concrete surfaces without special requirements

EUCAplex plus is a eucalyptus veneer plywood sheet with 220 g/m² film coating on both sides, for horizontal and vertical formwork applications.

Art.-No. 622