Art.-No. 589284000

Adapter for Framax Xlife plus ratchet 3/4" SW24 for removing the Framax Xlife plus fair-faced concr. cone 87mm from the concrete.

Art.-No. 589292000

Framed panel with Xlife sheet and form-tie points on the inside for crane-assisted forming of large areas. The panel is secured with a tie-rod system consisting of form ties that can be operated from one side.

Art.-No. 589293000

Framed panel with Xlife sheet and form-tie points on the inside for crane-assisted forming of large areas. The panel is secured with a tie-rod system consisting of form ties that can be operated from one side.

Art.-No. 589295000

Framed panel with Xlife sheet and form-tie points on the inside for crane-assisted forming of large areas. The panel is secured with a tie-rod system consisting of form ties that can be operated from one side.

Art.-No. 589308000

For watertight and fire-resistant closure of the form-tie points in the concrete.

One package contains 130 pieces.

Art.-No. 589216500

Mounts on the holding formwork and, in combination with the Framax Xlife plus form tie, enables the form-tie point to be operated from one side.

Art.-No. 176030000

Securing site-provided wooden parts to the formwork.

Art.-No. 580081000

For securing Doka formwork beams to closure plates.

One package contains 350 pieces.

Art.-No. 580114000

For securing Doka beams anywhere on the waling. Also suitable for post-assembly securing.

One package contains 40 pieces.

Art.-No. 580135000

For securing Doka beams H20 anywhere on the multi-purpose waling.

Art.-No. 580204000

Securing connecting pins, for example.

Art.-No. 580267000

For making rigid corner plates at any angle. After the formwork has been plumbed, two Half splice plates are welded at the predefined angle.

Art.-No. 580310000

Bolt-up longitudinal connector for Doka beams. Used for vertical stacking.

Art.-No. 580340000

Repositioning framed formwork panels by crane.

Art.-No. 580460000

For raising, repositioning and laying down timber-beam formwork.

Art.-No. 580476000

Bracket for making a working platform for drop-in engagement on the formwork.

Art.-No. 580488000

End-guard for platforms of between 1.20 m and 1.80 m wide.

Art.-No. 580500000

Transferring forces with single-sided formwork.

Art.-No. 580516000

Transferring forces with single-sided formwork.

Art.-No. 580579000

Releasing the positioning cones.